6 Place Setting White Table Top Dishwasher

Installation:

Comes with a standard inlet hose to be plumbed in, but can also be attached to most kitchen taps with a suitable adaptor (depending on the size and type of aerator you have on your tap, scroll through the photos if you are unsure what an aerator is)

Cleaning the Filter System:

The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best performance and results, the filter  must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the filter and cup under running water. To remove the filter , pull the cup handle in the upward direction.

Cleaning the Door and Panel:

To clean the edge around the door, you should use only a soft warm, damp cloth. To avoid penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind. Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components. The control panel can be cleaned by using a lightly dampened cloth. After cleaning, make sure to dry it thoroughly. For the exterior use a good appliance polish wax. Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning the Spray Arms:

The spray arms can be easily removed for periodic cleaning of the nozzles to prevent possible clogging. Wash them under running water and carefully replace them in their seats, checking that their rotary movement is in no way impeded. Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms under a jet of running water and replace it carefully to its seat. After reassembly, check that the spray arms rotate freely. Otherwise, check that they have been installed correctly.